Madras Glass & Plywood Depot

We provide all types of fine finished Plywood, which is a type of engineered board made from thin sheets of wood called plies or wood veneers. The layers are glued together, each with its grain at right angles to adjacent layers for greater strength.

The plies are bonded under heat and pressure with strong adhesives, usually phenol formaldehyde resin, making plywood a type of composite material. Resistance to cracking, shrinkage, twisting and warping make the Plywood widely useful than plain wood. Our Decorative Plywood is available at market leading rates that suit to buyers’ budget.

Plywood Advantages
• High Uniform Strength: Crossing the adjacent sheets tends to equalize the strength in all directions.
• Freedom from Shrinking, Swelling and Warping: Solid wood exhibits considerable movement across the grain but generally negligible shrinkage or swelling in a longitudinal plane. The balanced construction of a plywood panel with the grain direction of adjacent veneers at right angles tends to equalize stress, thus reducing shrinkage, swelling and warping.
• Non-Splitting Qualities: Solid wood splits fairly readily along the grain. Plywood by virtue of crossed laminations can be nailed or screwed near the edges without damage from splitting.
• Availability of Relatively Large Sizes: Sawn timber can be obtained in fairly long lengths but only in relatively narrow widths. Our Plywood are available in various sizes up to 6 ft * 25 ft and by the scarf jointing of small sheets up to 6 ft *40 ft, however 8 ft*4 ft is the most common size.
• Economical and Effective Utilization of Figured Wood: Twenty sheets of veneer can be sliced from 1 inch of solid wood. When glued to a core of cheaper material a high grade panel is produced. This procedure thus affects distinct economies in the use of figured or the more valuable woods.
• Ease of Fabrication of Curved Surfaces: The trend of modern architectural design is to feature curved surfaces. The desired shapes can be readily fabricated in plywood construction, utilizing male and female forms or a single forming a vacuum press or autoclave.
• Reduction of Waste: One of the important aspects in the manufacture of plywood is that it results in the conservation of timber by the elimination of the waste, which occurs in sawing e.g. sawdust. Waste is confined to the small core, which remains after peeling, from the veneer which is lost in rounding up the log, and the elimination of such defects as knots and splits.
• Dense Woods can Be Sliced and Bonded into Plywood Panels: Dense Woods can Be Sliced and Bonded into Plywood Panels for use in furniture construction whereas furniture fabricated from solid timber would be far too heavy.

Technical Support
We assist you in decision making process and guide in the selection of right product that will turn your home or office into a beautiful and calm place to stay with.

Plywood Range
• Commercial Plywoods
• Waterproof Plywoods
• Flexible Plywoods (Flexiply)
• Sound Absorption Composite Plywoods
• Shuttering Plywoods
o Film Faced Plywoods
o Densified plywoods

Partner in Growth
• M/s Hunsur Plywood Works Pvt. Ltd. (HUNSPLY)